lihlahisoa

Sebopeho sa tšepe se thehiloeng metsing se nang le letoto la li-anti-corrosion topcoat

tlhaloso e khuts'oane:

Letoto lena la lihlahisoa le etselitsoe ka ho khetheha bakeng sa li-anti-corrosion tse boima.E entsoe ka resin ea polyurethane e thehiloeng metsing, resin ea fluorocarbon e thehiloeng metsing le pigment e sebetsang e nang le isocyanate e phekolang.


Lintlha tsa Sehlahisoa

Li-tag tsa Sehlahisoa

Ts'ebetso e ts'oanang

Bokhoni bo botle ba anti-corrosion ho fihlela litlhoko tsa ts'ireletso ea seaparo sohle;
Ho sebelisa metsi e le mokhoa oa ho qhalakanya, ha ho na lintho tse chefo le tse kotsi tse hlahisoang nakong ea kaho le mokhoa oa ho roala filimi;
Pheko ea likarolo tse peli, boima bo botle, ho khomarela hantle, ho hanyetsa lik'hemik'hale, ho tšoarella ho feta lilemo tse 10.Khanya e ntle le ho boloka mebala.

Lethathamo la kopo

Sebopeho sa tšepe se entsoeng ka metsi se thibelang ho bola ha serie (

E loketse meaho e fapaneng ea tšepe e eketsehileng, likepe, lisebelisoa tsa mochini, marokho, boema-fofane, litanka tsa oli, liphaephe tsa oli le lits'ebetso tse nang le maemo a thata le litlhoko tse phahameng tsa ts'ebetso ea anti-corrosion.

Phekolo ea bokaholimo

Letoto lena la lihlahisoa le tlameha ho sebelisoa holim'a primer kapa seaparo se bohareng, 'me substrate ha e na oli le lerōle.Haeba ho na le mafome, e hloka ho phekoloa ka primer pele u sebelisa topcoat.

Tlhaloso ea Kaho

Khatello e phahameng ea ho fafatsa e se nang moea e khothalletsoa ho fumana filimi e tšoanang le e ntle.
Kopanya ka ho lekana ho ea ka tekanyo.Haeba viscosity e teteaneng haholo, e ka tšeloa ka metsi ho viscosity ea kaho.E le ho netefatsa boleng ba filimi ea pente, re khothaletsa hore chelete ea dilution e be 0% -5% ea boima ba pente ea pele.
Mongobo o lekanyeditsweng o ka tlase ho 85%, mme mocheso wa bokahodimo ba kaho o moholo ho feta 10°C mme o moholo ho feta mocheso wa phoka ka 3°C.

Sebopeho sa tšepe se entsoeng ka metsi se thibelang ho bola ha serie (3)

Liphutheloana tse khothalelitsoeng

Primer FL-128D/133D inorganic epoxy zinc e ruileng ka makhetlo a 1-2
Pente e bohareng ea FL-123Z e entsoeng ka metsi epoxy micaceous iron e mahareng nako e le 'ngoe
Topcoat FL-139M/168M polyurethane/fluorocarbon topcoat e thehiloeng metsing makhetlo a 2, botenya bo lekanang bo seng ka tlase ho 250μm

Boemo ba tsamaiso

HG/T5176-2017

Ho tšehetsa mekhoa ea tekheniki ea kaho

kganya phatsimo e phahameng
Mmala bua ka karete ea mmala e tloaelehileng ea naha ea sefate sa moea sa chime
Bolumo bo tiileng ba litaba 40% ±2
Sekhahla sa ho roala ka khopolo 8m²/L (filimi e omileng ea 50 microns)
Matla a khoheli a khethehileng 1.20kg/L
Sebaka se ommeng (50% mongobo) 15℃≤1h, 25℃≤0.5h, 35℃≤0.1h
Ho sebetsa ka thata (50% mongobo) 15℃≤10h, 25℃≤5h, 35℃≤3h
Nako ea ho ikoetlisa kgothaletswa bonyane 24h;boholo bo se nang moeli (25℃)
Pheko e felletseng 7d (25℃)
Ho thatafala 1H
Ho khomarela Sehlopha sa 1
Ho hana ho tshoha 50kg.cm
Nako ea tšebeliso e kopaneng 6h (25℃)

  • E fetileng:
  • E 'ngoe:

  • Ngola molaetsa wa hao mona mme o re romele wona